Overloading415

• Simcom Flash Update Tool V1 10.1
• Simcom Flash Update Tool V1 10.5
• Simcom Flash Update Tool V1 10 Download
• Simcom Flash Update Tool V1 10.10

The ESP32 Flash Download Tool, just like the ESP8266 download tool, is the official Espressif Download tool that runs on Windows platform. The tool can be used to modify and generate init BINs, generate consolidated BIN files or program multiple chips for production runs.

The tool uses COM port to send BIN files from PC to the ESP32, which then flashes the data to the primary flash chip.

There are multiple approaches to flashing the BIN files on to your ESP32 based system. Perhaps the simplest method to use with Espressif ESP32 ESP-IDF is to use command
make flash
in the Linux environment instead of just
make
as instructed in Getting Started with ESP-IDF Part – 3.
make flash will invoke scripts to actually flash your BIN files to your ESP32 through the USB-to-UART adapter. However, this may not work very well if you are running the Linux environment on a Virtual Machine. In that case, the flash download tool comes in handy!

• SP Flash Tool Download ( All Versions ) SmartPhone FlashTool, also known as SP Flash Tool which is the best recommendation for flashing MediaTek Android. It is completely a free option comes supporting any MediaTek Android Phone or Tablet in flashing Stock, Custom firmware, kernels, recovery files and more similar in targeting system alterations.
• Open Sim900 Customer flash loader.exe. Click 'Browse', and open.cla firmware file. Select COM port and set Speed: 460800. Click 'Start' And power the Arduino main board when show message:'Please power up the target'. And long press sim900-power button until the state LED 'S' lights up. LED 'N' start blink.

However, here we will go through the process of programming the ESP32 with the GUI based ESP32 Flash Download Tool. It is the official tool from Espressif Systems, the manufacturer of ESP32.

To proceed with the article, download the flash tool from here:

1. Select a particular tab to find related options. Select HSPI tab for HSPI flash download. In general, you should use SPI download mode.
2. BIN files to be downloaded. The checkbox must be checked and the file and address must be valid for a file to be successfully opened by program for download.
3. Crystal Frequency should be the frequency of the crystal connected to your ESP32 module.
4. SPI Flash speed. You may switch to 80MHz with fast flash chips. However, the ESP-IDF v.1.0 seems to be having issues with this higher than 40MHz.
5. Tells about the current operation status. Whether the download tool is idle or running, etc.
6. Start/Stop button to start or stop programming.
7. Progressbar to indicate firmware download program.
8. COM port settings such as baud rate and port number.
9. PHY MAC IDs for Wifi, BLE, ethernet, etc.
10. Information on the flash chip. This is acquired by low level API and this information is necessary for evaluating flash map, etc at runtime.
11. Flash memory size. Most modules will contain the ESP32 hooked to a Winbond 32MBit flash memory. You may change accordingly if your hardware differs.

Simcom firmware update tool and Simcom driver installed in system. The firmware is only compatible with the TX3.0 chipset hardware revision, ensure that current firmware revision begins with '1529' before applying this upgrade. Can be checked with AT command: AT+GMR Related products SIMCom SIM7000E CAT-M/NB-IoT PCIE. Here are the links to download SPD Flash Tool/SPD Upgrade Tool all versions. I will prefer to download the latest version because it supports new devices. Download SPD Flash Tool R21.0.0001 – Latest Version. Download SPD Flash Tool R19.0.0001. Download SPD Flash Tool R. Download SPD Flash Tool R4.0.0001. Download SPD Flash Tool R3.0. SIM800 SeriesEembedded ATCompiling EnvironmentV1.01 9 2013-07-11 3 Download Objective file includes two sections. One is core file for simcom module; another is app file for EAT case. Normally, core is here, just update app file. But if need new core version to build project, should download these two sections together.

As in ESP32 ESP-IDF v.1.0 with no modified ld script files, the locations should be as follows for normal applications:

0x1000: bootloader.bin
0x4000: partitions_singleapp.bin
0x10000: .bin

The flash map is very simple as the ESP-IDF does not support OTA in this version yet. Therefore, the system only consists of a bootloader, a data partition table and the main user application BIN (generated by you by compiling your code).

Pull GPIO0 LOW by pressing the “program” button on your development board. Reset the ESP32 by pressing the EN button momentarily while holding down the IO0 button.

Now the ESP32 will successfully enter the flash programming mode. You can now set the files and check the required BIN file slots in the software such that they are all set to be downloaded into the flash.

Next press the Start button to continue and flash the BIN files into your ESP32 module!

Make sure that the COM port has been correctly selected. The download tool would typically automatically detect an USB-UART converter.

If you are repeatedly flashing revised versions of your application during the development process, note that you need not flash bootloader and singleapp partition BINs repeatedly.

You simply need to flash the .bin every time you update your program and generate an updated BIN file. Uncheck the bootloader and partition BINs to prevent unnecessary writes to the flash.

If you have not already, we urge you to go through our tutorials on ESP32 ESP-IDF:
ESP-IDF Tutorial Part 1
ESP-IDF Tutorial Part 2
ESP-IDF Tutorial Part 3

Scroll down to the bottom of the page and SUBSCRIBE to us to stay updated!

Simcom Flash Update Tool V1 10.1

Amlogic USB Burning Tool lets you flash Stock Firmware on the devices powered by Amlogic Chipset.

Here are some features of the Amlogic USB Burning Tool:

Simcom Flash Update Tool V1 10.5

• Helps you to Flash or installs Stock Firmware (ROM).
• Supports devices running on the Amlogic Chipset.
• Comes with multiple configuration options, i.e. Erase Flash, Erase Bootloader, Reset After Success, Overwrite Key.

Simcom Flash Update Tool V1 10 Download

Download Amlogic USB Burning Tool

Simcom Flash Update Tool V1 10.10

We have multiple versions of the Amlogic USB Burning Tool available for download. Please note that we recommend using the latest version of the tool. If you face any issues with the latest version, do give the other versions a try.